Lumber / Siding
Home » Lumber » Siding

Siding

Board & Batten

We offer “green” pine Board & Batten for 95 cents/sqft for 12” wide boards, and $0.95/sqft for 10” wide boards*. The batten strips are 15 cents/lnft. Board & Batten siding is popular for its rustic look and also its economical price and rapidity of installation -- the boards may be installed “green”, without being dried, as the battens cover any gaps that occur as the boards shrink over time in the drying process.

*Please note: The narrower the board, the more batten strips are required, and consequently, more nails are required, so 10” or narrower boards may not be the more economical option overall for your budget.

117 “Washboard” 1 x 6 Siding

We manufacture this siding in kiln-dried grade 1 & 2 mix Southern Yellow Pine for $1.45/sqft. This siding is visually similar to a popular siding that is found across east texas homes.

105 “Dutch Lap” 1 x 6 Siding

We manufacture this siding in kiln-dried grade 1 & 2 mix Southern Yellow Pine for $1.35/sqft. This siding is visually similar to a popular siding that is found across east texas homes. Available in 8” upon request.

Shiplap

We manufacture this siding in kiln-dried grade 1 & 2 mix Southern Yellow Pine for $1.35/sqft. Available in 8” upon request, or grade 3.

Half Log 1x6 Siding

These half-log siding boards are about 1-½” thick at the thickest section and feature Tongue & Groove edges for ease of assembly and an air-tight seal. $0.95/lnft for kiln-dried Southern Yellow Pine and $1.85/lnft for Aromatic Red Cedar boards.

Custom Profile Matching

We offer the ability to match many types of custom or hard-to-find antiquated/historic/vintage siding profiles. This service is particularly useful for those remodelling older homes or performing restoration after storm/water damage. Starting at $0.25/lnft with a $75 setup fee. Please call for details.

We Mould Your Lumber

We also offer the ability to mould your existing hardwood/softwood into Tongue & Groove, V-Joint, Shiplap, etc. with our 4-head Logosol planer/moulder! Starting at $0.25/lnft with a $75 setup fee. Please call for details.